Cold Insulation
If we insulate, we can further prevent heat loss and save on energy. The insulation commonly used today is black rubber insulation, which has excellent thermal resistance (0.035 W/m·K). However, when comparing the cost of insulating versus the energy loss, it may be acceptable because most of the pipes inside a building are located within enclosed areas, both inside walls and under the ceiling. There is minimal air movement, resulting in minimal heat loss. Nevertheless, insulated pipes are still better in terms of energy conservation.
AEROFLEX
AEROFLEX EPDM™
Unslit; "split & glue" EPDM closed-cell elastomeric pipe insulation for new piping installations or whenever unslit tubes are required over existing piping.
AEROFLEX EPDM™ แบบท่อยาว
Continuous Tube Unslit EPDM closed-cell elastomeric pipe insulation available in continuous tubes up to 5,200 linear feet depending on ID and wall thickness. Ideal for long pipe runs.
InnoFoam® Pipe Insulation
Flexible closed-cell polyethylene foam pipe insulation designed to retard heat gain or loss, control condensation and provide freeze protection for hot and cold-water plumbing systems.Ideal for residential and light commercial applications.
ArmaFlex
AP ArmaFlex Tubes
Schools, hospitals, government institutions and commercial spaces of all types value the long-term performance and peace of mind that AP Armaflex lends to mechanical piping systems. Its moisture-resistant characteristics make it especially valuable on chilled-water and refrigeration piping where condensation might otherwise soak through fibrous types of insulations, significantly degrading their thermal performance, leaving them susceptible to fungal growth and ultimately shortening their lifecycle. Moisture-resistant AP Armaflex, however, maintains its physical and thermal integrity -- for the life of the mechanical system!
AP ArmaFlex Black LapSeal
Features include a wide lap seal closure system, with an easy-to-release liner tab. For added security, the low-profile lap seal ensures the longitudinal seam stays closed and looks neat. It’s the ideal solution for speeding up install times or making hard-to-reach installation areas easier to accommodate.
AP ArmaFlex White LapSeal
AP ArmaFlex, the world’s most recognized brand of closed-cell foam insulation, provides superior protection against thermal losses, condensation and moisture accumulation that leads to mold. It is the ideal choice for insulating mechanical piping systems.
MaxFlex FR
MAXFIX, MAXFLEX FR
MAXFLEX DUCTWORK is a black EPDM rubber insulation for air conditioning duct systems.
It offers excellent properties, including water resistance, minimizing heat loss, effective sound absorption, and protection against UV/OZONE radiation. It is durable in all weather conditions and is available in various formats.
MAXTAPE
MAXTAPE is a roll of adhesive-backed insulation tape. MAXFLEX TAPE is made from an insulation tape with an EPDM material on a foam sheet, and it is specially coated with a pressure-sensitive acrylic adhesive to ensure strength and durability, extending its service life. It is a lightweight, closed-cell insulation with stable and low thermal conductivity, which serves the purpose of delaying heat loss, insulation, and sealing. MAXFLEX TAPE is made from the same rubber material as MAXFLEX.
MAXGLUE
MAXFLEX GLUE is a special adhesive formula designed for bonding thermal insulation materials like closed-cell Maxflex elastomeric insulation. Its high water and moisture resistance properties prevent the penetration of moisture or water at the adhesive joints. MAXFLEX GLUE also functions as an excellent adhesive when used at high temperatures, and its bonding strength increases rapidly after it has been subjected to cross-linking with acrylic polymers.